Best modifications under $50
#4901
DIY Diamond Plate Tonneau
SO maybe this is slightly over budget but I figured worth posting. I am not a fan of tonneau covers unless your spending $900+ to get an accordion style tonneau, as they are much too big and make a truck essentially worthless when carrying something large. however, in some cases they are needed. here is my build.. And yes its an 08' and a Lincoln but all cases should apply.
diamond plate sheets $70
diy trailer style hinge pins $4
aluminum angle free as I already had it but typically $5 each 8' length
Last edited by black mark lt; 11-28-2014 at 11:31 AM.
#4902
Senior Member
Nice job! I've been thinking about converting my soft trifold into a hard trifold in a similar fashion. I like the retractable tonneaus too.
#4903
Senior Member
SO maybe this is slightly over budget but I figured worth posting. I am not a fan of tonneau covers unless your spending $900+ to get an accordion style tonneau, as they are much too big and make a truck essentially worthless when carrying something large. however, in some cases they are needed. here is my build.. And yes its an 08' and a Lincoln but all cases should apply.
diamond plate sheets $70
diy trailer style hinge pins $4
aluminum angle free as I already had it but typically $5 each 8' length
diamond plate sheets $70
diy trailer style hinge pins $4
aluminum angle free as I already had it but typically $5 each 8' length
The following 4 users liked this post by KingRanchAg:
BlueFlameEB (11-30-2014),
claytos1000 (11-28-2014),
djturner (11-28-2014),
The Beer Baron (12-12-2014)
#4905
I do not but I will post more pics at my desktop later it appears I cannot on the mobile app. Was pretty easy. Rivets hold it together. Remember keeping it light is important. One thing to keep in mind also is that for the angle aluminum on the back half of the front panel must be reversed in order for the back have to clear it one folding
#4907
Senior Member
I do not but I will post more pics at my desktop later it appears I cannot on the mobile app. Was pretty easy. Rivets hold it together. Remember keeping it light is important. One thing to keep in mind also is that for the angle aluminum on the back half of the front panel must be reversed in order for the back have to clear it one folding
#4909
Deleted some comments.
If you guys can't play nice, Stay out of this thread. We are supposed to stick together, ya'll are fighting like you drive dodges.
If you guys can't play nice, Stay out of this thread. We are supposed to stick together, ya'll are fighting like you drive dodges.
The following 8 users liked this post by bobkyle2:
eng45ine (12-01-2014),
Jus Jim (11-30-2014),
LaBalaDePlata (12-08-2014),
Lunchbox! (12-04-2014),
PJgabe (11-30-2014),
and 3 others liked this post.
#4910
The following users liked this post:
Wesleypipesyo (07-14-2021)