Best modifications under $50
#2082
Senior Member
OK the amazon console organizer works just find for those with the column shift console. Picture not that great but you get the idea.
The following users liked this post:
tko_818 (11-04-2013)
#2083
Senior Member
Also here is my take on the board bed divider. A 2x10 with different size holes cut with a hole saw. All holes routed to remove corners & the whole thing coated in cheap bed liner.
The following 5 users liked this post by Magnus1350:
34Duke (02-02-2014),
Blondie70 (11-14-2014),
g_spyder91 (09-30-2014),
kinkaid (11-11-2013),
Talabama (08-22-2014)
#2084
Nice job. It's funny how something as simple as cutting/routing holes and painting it takes it from a plain piece of scrap wood to something that looks like it belongs.
The following users liked this post:
Magnus1350 (11-08-2013)
The following users liked this post:
Magnus1350 (11-08-2013)
#2086
I built traction bars for just over $50 (i know...I broke the $50 limit, but its close). Bushings were $12 a piece with the sleeve and about $4 worth of bolts from TSC. I already had the tubing and scrap metal for mounts. Best thing yet on my truck other than the programmer. No more wheel hop and much more planted.
The following users liked this post:
buck91 (01-23-2014)
The following users liked this post:
EcoBrook (11-07-2013)