Best modifications under $50
#181
Brianm825
And definitely this sounds cool, too bad the HD already has a beauty interior. Even though I might be a little bit afraid that having a Harley emblem on my truck might make it more prone to catastrophic failure...you know, the truck might get confused and think its an actual Harley "40,000 miles on the odometer? I thought I was a Harley...I should be dead by now!" Hahah.
#183
Installed a brake controller. Little brother had an extra one laying around and just gave it to me. I think about $14 for the connector, saved me from having to cut into his controller to wire it to the one that came with the truck.
Last edited by wintersucks; 08-21-2012 at 12:01 AM.
#185
Senior Member
I did a write up in the last post of this thread:
https://www.f150forum.com/f38/can-po...135792/index2/
My unit is small, so I just set it on the ledge in front of the clock/compass/thermometer. I was using the stick on mount, but it couldn't take the heat this summer...
https://www.f150forum.com/f38/can-po...135792/index2/
My unit is small, so I just set it on the ledge in front of the clock/compass/thermometer. I was using the stick on mount, but it couldn't take the heat this summer...
The splitter and coax pieces were from a friend who used to install satellite dishes, and any generic tv type splitter and cables will work.
You can expand your mounting options by getting a longer cable like these:
Last edited by TheRevJosh; 08-21-2012 at 09:27 AM.
#186
Senior Member
My dog loves to ride in my truck. She likes to stick her head out the window like every dog out there. I do not like her on my leather seats however so I made a platform using some old 2 x 4's I had lying around. I bolted it down to the floor using the existing mount for the jack.Then I found an old towel and stapled it to the platform. She loves it.
The following 28 users liked this post by BurntToast:
9dawgs (12-19-2013),
AKFX4 (08-19-2013),
Aungeliquema (06-24-2023),
AZPoolBoy480 (07-15-2013),
BetsyFord025 (12-05-2013),
and 23 others liked this post.
#187
Originally Posted by tennisfam4
Love those LED's. Another cheap mod I did this past weekend was install lights under the dash and under the front seats. Total cost $15.00.,,,,,
#188
Originally Posted by Highsticks Eh!
Such a cool mod! I was gonna attempt this one today but am having a hard time figuring out the power source... not much of an electrician. Lemme know if you guys have any quick tips on how to hook up power to these LED's as I am certainly no pro cheers
The following users liked this post:
Highsticks Eh! (08-22-2012)
#190
Originally Posted by schizbomb
Anyone attempted to drill a hole for a USB2 mod into that "coin holder" where the 4x4 switch would be?
I've been thinking about it.
I've been thinking about it.