tips for replacing driver side O2 sensor (upstream) on 2014 F150
#1
tips for replacing driver side O2 sensor (upstream) on 2014 F150
I have a 2014 F-150 FX4 with the ecoboost 6 cyl and my drivers side 02 sensor needs to be replaced. I have the part and an 02 socket but the old sensor is in a real tight spot, pretty awkward to get to and I can't get a breaker bar on it. I'm stuck basically since i can't budge the old one to remove it. Would love some ideas on how to get this done if anyone has tackled this repair successfully. Thanks!!
#2
Map gas!!! heat that sucker up first. I went to pawn shop and purchased a long 7/8 box end wrench.
Bent it at the vise to get the angle I needed. Pain in the butt, but was able to get some leverage on it.
And it popped.
Bent it at the vise to get the angle I needed. Pain in the butt, but was able to get some leverage on it.
And it popped.
The following users liked this post:
Gdubnsotex (04-25-2021)
#4
Senior Member
^ what he said
make sure you cut the correct side of the harness
might be able to use a swivel on there as well
make sure you cut the correct side of the harness
might be able to use a swivel on there as well