Anybody else have a creak in their front doors when opening and closing the doors?
#1
Anybody else have a creak in their front doors when opening and closing the doors?
Kind of driving me nuts and I can't figure out where its coming from. I put some wd40 on the door dedents but it didn't make a difference.
The following users liked this post:
bubblehead33 (11-01-2015)
#2
One Clean Machine
iTrader: (5)
Its more than likely where the 2 pieces of Weather stripping touch at the upper most points of the inside of the door and cab. Its towards the front, mine does this as well.
Ive used silicone, to keep the seals in good shape. But, you still get the slight creak/rub regaurdless...
Ive used silicone, to keep the seals in good shape. But, you still get the slight creak/rub regaurdless...
The following 3 users liked this post by Toddman38:
#3
Senior Member
Toddman34 - Its more than likely where the 2 pieces of Weather stripping touch at the upper most points of the inside of the door and cab. Its towards the front, mine does this as well.
Ive used silicone, to keep the seals in good shape. But, you still get the slight creak/rub regaurdless...
Ive used silicone, to keep the seals in good shape. But, you still get the slight creak/rub regaurdless...
.
The following users liked this post:
Toddman38 (11-01-2015)
#4
Senior Member
Its more than likely where the 2 pieces of Weather stripping touch at the upper most points of the inside of the door and cab. Its towards the front, mine does this as well.
Ive used silicone, to keep the seals in good shape. But, you still get the slight creak/rub regardless...
Ive used silicone, to keep the seals in good shape. But, you still get the slight creak/rub regardless...
#5
Senior Member
Just now with the cooler weather the wiring harness inside the door moves as I close the door. The wires inside that rubber tube by the door detent have to go somewhere. Both doors do it on my truck.
#6
Senior Member
My right front door the detent thingy pops / clicks at the last notch very annoying
#7
One Clean Machine
iTrader: (5)
Trending Topics
#8
American member
Its more than likely where the 2 pieces of Weather stripping touch at the upper most points of the inside of the door and cab. Its towards the front, mine does this as well.
Ive used silicone, to keep the seals in good shape. But, you still get the slight creak/rub regaurdless...
Ive used silicone, to keep the seals in good shape. But, you still get the slight creak/rub regaurdless...
#9
well, ****.