After Market Decals Post:
#21
Senior Member
Did you take apart all that to wrap it with the carbon vinyl? I noticed some wrinkles on there. Best way to avoid those is to use a heat gun to help mold the vinyl.
I dig the way it looks though. Been thinking about doing the same to mine. How did you cut the one on the hood?
I dig the way it looks though. Been thinking about doing the same to mine. How did you cut the one on the hood?
I used "Knifeless Finish Line Tape" on the hood.
#23
Senior Member
Hi guys. I've ordered some custom bedside decals to replace my XTR ones. Any tips before they arrive, how to make sure I'm installing in the same spot and that they will be completely "level"? I'm guessing tape off around the old decal before I peel it off, for a positioning area.....making sure the new decal will be level is my worry. Only the slightest off level will be noticeable. Thanks for your help!
#24
American member
After Market Decals Post:
I'm dragging this one back out. My 2005 fx4 had the carbon fiber center stack from the factory.
I liked that look, much better than the silver stack and floor shifter my 2014 fx4's black interior has this time.
I think I'm going to give carbon fiber look a try.
I liked that look, much better than the silver stack and floor shifter my 2014 fx4's black interior has this time.
I think I'm going to give carbon fiber look a try.
Last edited by Masi1926; 09-21-2015 at 08:37 AM.
#25
Senior Member
Hi guys. I've ordered some custom bedside decals to replace my XTR ones. Any tips before they arrive, how to make sure I'm installing in the same spot and that they will be completely "level"? I'm guessing tape off around the old decal before I peel it off, for a positioning area.....making sure the new decal will be level is my worry. Only the slightest off level will be noticeable. Thanks for your help!
I measured 3 or 4 places from the top of the bed to ensure the decal would be level with it.
Ultimately I think I am about 1/2 inch, or so, higher than the original decal but it isn't noticeable.. And it is level with the bed and light.
#27
Senior Member
#28
End of the Earth