Adding 3rd brake Raptor light...
#1
Adding 3rd brake Raptor light...
Hi guys, I just purchased a 2014 XLT Supercrew F150 and was looking to install a Raptor 3rd brake light. To my understanding, if the truck has a 4th wire it will be plug and play and if not you need to add a wire from the fuse box to have the daytime running lights. I took mine off and I believe I only have 3 wires. I posted some pictures below, if someone could take a quick look and confirm I only have the 3 wire versions (hopefully I'm missing something and I have the 4th haha) I would really appreciate it. As always, any help is greatly appreciated!
Last edited by JohnRamboJedi; 08-15-2015 at 05:14 PM.
#4
#6
Senior Member
Under the rear headliner, between the two plastic pins.it will be attached the the roof,be careful and don't crease the headliner..
Last edited by FX4RubyRed; 08-15-2015 at 05:34 PM.
Trending Topics
#8
Man, that is really tough to see. I feel I will bend it bad. I really couldn't see. I think I will pick a 3rd light up and just give it a shot! I do have the 4x4 off road package will hill descent, I heard that might be the determining factor
#9
Senior Member
Some others on here have that and didn't have the forth wire.when I did mine,I pulled the 2 pins and pulled the head liner out of the d pillars on the side a little bit.
#10
You most likely have it. Mine was a 13 with the offroad packaged and hill decent. Mine had it.