2012platinum

You'll have to do a little plastic trimming just like with any big tire, but it'll fit. Make sure you post pics! I wanna see it when you finished.

briantavaresvalente

have a 2013 fx4.. ordered a rancho 4 inch lift 20 by 9 hostage rims with a 1 mm offset and nitto trail grappler tires 295/65R20/10.. jus got everything yesturday finally and they sent me the wrong rims :/ they sent me -12mm offset instead of +1mm offset.. i like the look of the -12mm but not sure if thats to much will this work.. obivoulsy some trimmings going need to be done but idk.. can anyone help me out????

2012platinum

personally, I like more offset. The wider stance just looks meaner to me. I ran -12's with a level and 33's, and other members, [MENTION=120634]DavidSchlot822[/MENTION], have run a level with 35's and -12 wheels. So you'll be fine with a 4" lift. You'll have to do some trimming of the air dam, and the inside factory flares against the wheel well, but it'll work. Should look pretty good too

USMC_0316_RAIDER

Im running -12s. Tons of room for 35s. No worries at all. Love the 4" rancho kit to

briantavaresvalente

yeah thanks guys.. was deff worried about that but guess i should be alright

TMurphy11

Would I clear the steering knuckles of the rancho 4 inch kit with 20x9 Mavs with +20 offset if I put 295/65s on? I'm confused with the backspacing. I don't see why it wouldn't fit.

Gonkey

You will clear the suspension fine just a little plastic trimming required .

TMurphy11

Which tire size would be best?

Gonkey

35x12.5s would fit fine .

TMurphy11

Everyone says rancho won't confirm if 5.7 inches of backspacing will fit. That's my biggest concern with the +20 offset