Lights In Bumper Hole
#1
Senior Member
Thread Starter
Lights In Bumper Hole
I have some Hella HID "KC Style" lights that I plan to mount in the bumper hole where the front license place covers. I have removed the plate bracket and installed a billet grill. I want to mount the lights behind the billet grill, has anybody done this? If so, can you post pics?
Wayne
Wayne
#2
Senior Member
Thread Starter
Well since nobody gave me any details on how to mount them I came up with a very secure and easy way to mount them. I mounted them and didn't like that they were so closed together so I moved them apart and personally think it looks much better.
They are Hella FF200 HIDs. I removed the factory 4300-5000k ish bulb and replaced with 3000k to match my fogs. I also got a smoked vinyl and applied that to the lense to protect them and to "hide" them behind the grill when off. The last pictures shows how I had them mounted inward at first.
Wayne
They are Hella FF200 HIDs. I removed the factory 4300-5000k ish bulb and replaced with 3000k to match my fogs. I also got a smoked vinyl and applied that to the lense to protect them and to "hide" them behind the grill when off. The last pictures shows how I had them mounted inward at first.
Wayne
#4
Senior Member
Thread Starter
Before anybody says thats retarded you should have gotten a light bar. I would totally agree with you but these lights were getting to me so all it cost me was $20 for bulbs, $30 for harness and $10 for the angle iron used to mount them.
One day the plans are to mount a amber light bar but until then ill rock these!!
Wayne
Last edited by Z7What; 08-14-2013 at 04:24 PM.