Default Door Code, where is it?
#1
Default Door Code, where is it?
I've searched around the forum with no real luck. Does anyone know where the default code is for the door pad? 2013 Lariat Supercrew 4x4. Thanks!
The following users liked this post:
BigHutch (08-13-2013)
#3
Member
Only works for 2013^
Last edited by RLXXI; 08-13-2013 at 08:58 PM.
The following users liked this post:
BigHutch (08-13-2013)
#4
Senior Member
**EDIT** This is a location to look for Pre-2013 without the in dash screen
1. Take the fuse panel cover off. This is located at the floor board on the passenger side.
2. Take the plastic corner molding off, it just pulls out but be careful not to break it.
3. Look behind the SJB for the 5-digit code. If you can't see it. Removing the two 7mm bolts which will allow you to move the SJB out enough to see it
better.
1. Take the fuse panel cover off. This is located at the floor board on the passenger side.
2. Take the plastic corner molding off, it just pulls out but be careful not to break it.
3. Look behind the SJB for the 5-digit code. If you can't see it. Removing the two 7mm bolts which will allow you to move the SJB out enough to see it
better.
Last edited by trailblazen; 08-13-2013 at 09:07 PM.
The following users liked this post:
BigHutch (08-13-2013)
#5
Senior Member
Do all 13's have that center console display? If so there you go but if it doesn't then give mine a try. I gave it the ol' college try at least.
Last edited by trailblazen; 08-13-2013 at 09:02 PM.
#7
Member
Trending Topics
#8
You need two programmed keys, put the first one in and cycle the ignition, put the second in and do the same, the code will appear on your instrument cluster display.
Only works for 2013^
Extract key pad code 2013 F150 - YouTube
Only works for 2013^
Extract key pad code 2013 F150 - YouTube
The following users liked this post:
RLXXI (08-13-2013)
#10
One Clean Machine
iTrader: (5)