Andrade

iTrader: (3)

Wondering if the 2015 badges will line up on the alignment holes on our 09-14 F150's, I like those badges better, thoughts?

bsmit24

They aren't the same.


@beetlevegas has them


https://www.f150forum.com/f2/what-di...5/#post3842141

Andrade

iTrader: (3)

So much for being original! I'll still give it a try.

RajunKajun59

Someone on here did it with the 04-08 150, They looked good and Fit, He did say a pin needed to be broken off iirc. The Tail Gate badge May not fit though.

beetlevegas

I did it on my truck. NO THEY DO NOT LINE to the org holes. I have a Lariat so the name covered the holes. You just have to line it by hand, I used a laser level to do it. It took a little to make sure that it was strait but it came out good.

beetlevegas

The tail gate I is no problem just get some Body tape and I used a very small piece and used touch up paint. Then I put the emblem over it. Because if not you will have a small part of the hole open under the emblem.

beetlevegas

This is the fender. I don't know how the XLT will work

The hole is behind the F

beetlevegas

O sorry one more thing. YOU HAVE TO cut off ALL Tapes to make it work. It only takes a couple of Mins.

nickbar24

i saw beetlevegas post his up once, we talked and thanks again to him, i pulled the trigger also. mine is on a 12' and the only tricky thing is on the passenger side the holes are very close to line up and cover. but all in all i spent maybe an hour on the entire project. love the look and have already got a few compliments. thanks again for idea beetlevegas

Suzuki14258

Ford really doesn't want those emblems coming off of the 2015s lol