icestation

I have a 2014 XLT Screw, I got a factory power slider with defrost that I paid 100 bucks for, and the ceiling console with button, I started pulling the truck apart and my truck does NOT have the factory plug for the slider motor.
It has the defrost plug but NO where can I find the motor plug, It has the circuit breaker in the fuse box for the motor, and now I am about to dig even deeper hoping to find something, I spent an hour plus reading the threads on here and it looks like most people have the plug just sitting back there.
Long story long.... if anyone could guide me before I gut my entire interior that would be great.

RLXXI

If it has the harness it's going to be behind the rear seat back under the window.



.

icestation

Yeah it's not there, I have pulled the side panel (where the seat belt comes out) and door jam molding, the fuse box on the passenger kick, it is not there.
So now I am wondering what my options are?

RLXXI

Ford sells the sliding window in kit form but requires dealer installation.
.

icestation

Yeah, any dealer required anything around here (Kendall Ford Eugene OR) is not an option, dealing with those morons is an excersise in futility. They wanted $200 to program a key and turn the remote start option on. They charge full pop plus for anything.

So does anyone have a harness that comes with the kit they will sell me, or I will just wire it myself. I will do a write up if that is the case for others that want this

Toddman38

iTrader: (5)

Diy, and save yourself money and headaches...

Delz

iTrader: (2)

You can purchase just the wiring harness for the motor. I think its like a 100 dollars. I cut the end of the harness for switch and custom mounted a honda civic switch in the overhead console .