Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

2014 Fx4 Screw Owners - need input

Thread Tools
 
Search this Thread
 
Old 02-03-2016, 11:01 AM
  #1  
Senior Member
Thread Starter
iTrader: (1)
 
Waterfowler41's Avatar
 
Join Date: Nov 2010
Location: Naperville, Illinois
Posts: 885
Received 37 Likes on 31 Posts

Default 2014 Fx4 Screw Owners - need input

I'm taking a look at a 2014 Fx4 screw with the 3.5 eb with 23k miles on it. It was a lease trade in from Washington that through the auction found its way to Chicago.

That's said, any particular areas I should focus my initial look on with this truck? I have a '10 fx4 scab with the 5.4 so this is my first go at an eb.

Tried looking around and only found one guy with bad stuff to say about the 14 fx4.

Again, just looking for areas you have had issues with in your 14 screw fx4 so I can pay particular attention to them tonight when I take a look at the truck. Drivetrain issues? Suspension knocking? Rattles? Anything else?

Thanks!
Old 02-03-2016, 04:33 PM
  #2  
Junior Member
 
jshk's Avatar
 
Join Date: Dec 2014
Posts: 14
Received 1 Like on 1 Post
Default

I've had mine a little over a year and already suffered a flat tire and burned out tail light.
Old 02-03-2016, 09:42 PM
  #3  
Senior Member
 
Jaysonics's Avatar
 
Join Date: Mar 2015
Location: Ashburnham, MA
Posts: 385
Received 345 Likes on 145 Posts

Default

Have had my 2014 fx4 for just about a year now with no issues. Good luck!
Old 02-04-2016, 02:07 PM
  #4  
Senior Member
iTrader: (1)
 
kidastra's Avatar
 
Join Date: Jul 2012
Location: Montreal, Quebec
Posts: 3,474
Received 613 Likes on 497 Posts

Default

Yep had nine over a year and no real issues to speak of, oddly it does burn nor fuel then my 2012 exact same setup except for gearing (3.55 in the 14, 3.73 in the 12) also feels under powered compared to my 12. Typical issues from all the years, but all should be covered under warranty



Quick Reply: 2014 Fx4 Screw Owners - need input



All times are GMT -4. The time now is 10:44 PM.