2011 adding backup camera?
#12
Senior Member
Does anyone have the complete parts break down with part numbers. I have a 11 fx4 with sync mic in the headliner. I would like to use all the factory cables and harneses.
#13
Senior Member
This picture shows the mirror connector pins. Your looking for numbers 8 & 16. 8 is White with Green stripe and 16 is Brown with Violet stripe.
This will tell you if you have the correct roof harness shown here in red:
This is the connector for the camera harness where it plugs into the taillight harness:
Check to see if your tail light harness has the above connector.
This one shows the body and tail light harnesses, connector C405 should have the White with green stripe and brown with violet stripe if you have the correct body harness:
#14
Senior Member
My truck has no sunfoof, nav system, has pwr slider window. kansas city build 8/11
#15
Senior Member
So the kit on ebay is the way to go then and add the missing harneses from ford right?
#18
Senior Member
Originally Posted by Ken07AOVette
Has anyone got pictures that show how the wires run out of the tailgate to the body? I am pondering adding a camera to my 2005.
Here are some pictures of mine with the tailgate open.
Overview
Tailgate side were harness clips to tailgate.
Bed side.
#19
Senior Member
Ok got all the parts on the way. I called tasa parts and got the body harness and the headliner harness to make this totaly factory. My dealer can flash the software to make the zoom and guide bars work as they should. So all I have to do is install it all.
#20
[QUOTE=pickupman2007;1220208]The wire harness drops through the tailgate from the camera and comes out the bottom center of the tailgate and passes through a hole in the back of the bed.
Here are some pictures of mine with the tailgate open.
QUOTE]
Very nice, thanks for the fast response!
Here are some pictures of mine with the tailgate open.
QUOTE]
Very nice, thanks for the fast response!
The following users liked this post:
ccc150 (07-30-2014)