k3capt

ok so i have a 2010 ford f150 xlt did the led bulb swap with brake turn and tail lights and now having the hyper flash on turn signals wanna replace the flasher with led unit but i cannot find the flasher took dash all apart did not find behind radio also pulled inst cluster heard flash from there but seen no flasher can some one help please need to find that darn flasher pics would be nice or diagram

thanks scott

RES4CUE

I believe you need a load equalizer for them. They draw alot less power and your truck thimks the bulb is burned out hence the fast flashing signal in the cluster.

BigBlockOBS

There is no flasher relay to change. Its all done in the SJB. The SJB makes the noise as a relay cuz everyone is use to the noise. I don't know if there is anything to help you as far as aftermarker but I know there was an SSM for that problem on some cars.

k3capt

what is the ssm and you are saying there is no flasher to change out. i do here the clicking in the inst cluster i didnt think they would put it in there not enuff room.

k3capt

do i need a equlizer to each bulb have two in front and four in rear ?

k3capt

could you explain the ssm problem in more detail please !

iamsuperbleeder

if I'm not mistaken, one on each side would do it; it doesn't matter front or rear

03Cobraa

What kind of LED bulbs did you use? Where did you get them? Some leds have load resistors made in to the base to prevent this. Do you like the light output of them?

sweddy

My truck is an 04 and I have load resist bulbs and I still had to order the relay.. Sounds stupid 4 them not to put a flash relay in.. Must be all the technology

k3capt

ok so I went to the ford dealer after some research the new 2010 ford f150 has no turn signal relay they(ford) tell me its in the computer and they did not recommend wiring in the load resistor to factory wiring ugh! so i took out the led tailights gonna send them back and i ordered the complete led tail light with the load resistor already installed. dunno for sure what im goona due with the front turn signals i did leave in the led side marker light all good for now.