2 questons
#1
New Guy
Thread Starter
2 questons
1. I've seen nylon, steel, and aluminum leveling kits. Which should I go with? Whats the differences besides the material?
2. Is anybody running a 275/60r20 on stock fx4 wheels with no lift? I'm torn between getting a leveling kit and not.
Thanks in advance.
2. Is anybody running a 275/60r20 on stock fx4 wheels with no lift? I'm torn between getting a leveling kit and not.
Thanks in advance.
#2
Senior Member
do it right, cry once, and love it forever
#3
New Guy
Thread Starter
i used to run a daystar 2in level which was a polyurethane spacer, in reality i got 1.5in of lift not the full 2 and it was pretty good for $110 but man once i added the extra 100+lbs of grille guard to the front in squashed them and my factory shocks back to stock height so then i just recently got fox 2.0s which is a leveling strut which uses spring load to lift the truck and it is a million times better than the daystar ever was, IMO if your going to level a truck spacers are the cheap way for a truck you won't be keeping long but if you plan to run it till the wheels fall off and then put new ones of then get a coilover leveling strut like fox or icon even rancho thought they aren't as good as they once were, yes a coiler will cost way more than a spacer ever will but that is the true way to go and you won't regret it i promise ,
do it right, cry once, and love it forever
do it right, cry once, and love it forever
#4
Senior Member
I honestly don't know if it makes any real difference which material the kit is made of ... I just tend to think along the lines that either the kit is well made and worth it, or it's not. The kit I chose was/is the Autospring 1.5" kit ... steel, coated, very high quality, and gave me a tad more lift than I expected - which turned out to be a good thing.
The above issue re: the grill guard and its weight lowering the front end back to stock has nothing to do with the lift/level kit ... unless of course the spacers actually "squashed" under pressure - which goes back to what I said ... either the kit is well made, or it's not. I can't speak on that because I have no experience w/ that kit, and the guy who posted about it didn't say that the kit/spacers failed.
In any event, you can EASILY run 275/60's w/out a level/lift. Our stock tires are basically 32" tall ... the 275/60's are 33" tall ... only 1/2" bigger in any given direction, and same width as stock. I ran those on my 2008 FX4 w/out any level/lift.
If you really wanna do a level kit, I would highly recommend just getting the AS 1.5" kit... and if you feel the back end needs to be raised up, get slightly larger blocks and change them out yourself ... it's super easy to do.
Here's a pic of my truck w/ the 1.5" kit up front, 2" rear blocks (replacing the factory 1 3/8" blocks) ... and 295/60r20's on stock wheels. It's got about 1/2" rake and easily clears my tires.
The above issue re: the grill guard and its weight lowering the front end back to stock has nothing to do with the lift/level kit ... unless of course the spacers actually "squashed" under pressure - which goes back to what I said ... either the kit is well made, or it's not. I can't speak on that because I have no experience w/ that kit, and the guy who posted about it didn't say that the kit/spacers failed.
In any event, you can EASILY run 275/60's w/out a level/lift. Our stock tires are basically 32" tall ... the 275/60's are 33" tall ... only 1/2" bigger in any given direction, and same width as stock. I ran those on my 2008 FX4 w/out any level/lift.
If you really wanna do a level kit, I would highly recommend just getting the AS 1.5" kit... and if you feel the back end needs to be raised up, get slightly larger blocks and change them out yourself ... it's super easy to do.
Here's a pic of my truck w/ the 1.5" kit up front, 2" rear blocks (replacing the factory 1 3/8" blocks) ... and 295/60r20's on stock wheels. It's got about 1/2" rake and easily clears my tires.
#6
New Guy
Thread Starter
Thanks for yall's replies. This has really helped with my decision. I want to lift my truck, but part of me doesn't b/c my wife is only 5'3" and i have a toddler and a baby. I just bought a set of FX4 wheels and am going to the tires on those. Beautiful trucks guys.
#7
Senior Member
I honestly don't know if it makes any real difference which material the kit is made of ... I just tend to think along the lines that either the kit is well made and worth it, or it's not. The kit I chose was/is the Autospring 1.5" kit ... steel, coated, very high quality, and gave me a tad more lift than I expected - which turned out to be a good thing.
The above issue re: the grill guard and its weight lowering the front end back to stock has nothing to do with the lift/level kit ... unless of course the spacers actually "squashed" under pressure - which goes back to what I said ... either the kit is well made, or it's not. I can't speak on that because I have no experience w/ that kit, and the guy who posted about it didn't say that the kit/spacers failed.
In any event, you can EASILY run 275/60's w/out a level/lift. Our stock tires are basically 32" tall ... the 275/60's are 33" tall ... only 1/2" bigger in any given direction, and same width as stock. I ran those on my 2008 FX4 w/out any level/lift.
If you really wanna do a level kit, I would highly recommend just getting the AS 1.5" kit... and if you feel the back end needs to be raised up, get slightly larger blocks and change them out yourself ... it's super easy to do.
Here's a pic of my truck w/ the 1.5" kit up front, 2" rear blocks (replacing the factory 1 3/8" blocks) ... and 295/60r20's on stock wheels. It's got about 1/2" rake and easily clears my tires.
The above issue re: the grill guard and its weight lowering the front end back to stock has nothing to do with the lift/level kit ... unless of course the spacers actually "squashed" under pressure - which goes back to what I said ... either the kit is well made, or it's not. I can't speak on that because I have no experience w/ that kit, and the guy who posted about it didn't say that the kit/spacers failed.
In any event, you can EASILY run 275/60's w/out a level/lift. Our stock tires are basically 32" tall ... the 275/60's are 33" tall ... only 1/2" bigger in any given direction, and same width as stock. I ran those on my 2008 FX4 w/out any level/lift.
If you really wanna do a level kit, I would highly recommend just getting the AS 1.5" kit... and if you feel the back end needs to be raised up, get slightly larger blocks and change them out yourself ... it's super easy to do.
Here's a pic of my truck w/ the 1.5" kit up front, 2" rear blocks (replacing the factory 1 3/8" blocks) ... and 295/60r20's on stock wheels. It's got about 1/2" rake and easily clears my tires.
But i would reccomenf the autospring like he has if your going with a spacer
with the fox 2.0 set at 2 in and a 1.5in rear bloack i have about 1.25in rake and im sitting at about the stock height of a 4x4 maybe a little more
Trending Topics
#8
Senior Member
2 questons
Thank god for my platinum steps I have a 4 month old 17lbs and it's a pain to get him in a out and my truck is stock lol
#9
New Guy
Thread Starter
#10
Senior Member
I had the Bilstein level on my 07 and it's nothing more than an adjustable snap ring set into a groove on the strut housing - never had a problem.
I put a 2" Heavy Metal brand set on my '13, it's just a steel spacer for the top of the strut - no issues yet!
I put a 2" Heavy Metal brand set on my '13, it's just a steel spacer for the top of the strut - no issues yet!