DylanCulbreth

Hes right the only nuts i had to remove were top shock mounts (3) ball joint (1 very rusted) brake line bracket(1) sway bar (1) and lower shock mount(1 big one) so a total of 7 bolts and the whole axle and shock just dropped right down

Newfie FX4

For those that have installed a spacer in a '14, is this accurate?

http://www.readylift.com/files/instr...structions.pdf

NASSTY

No that shows a pre-2014 LCA and strut.

Newfie FX4

Do you know if anywhere has instructions for '14? It would be nice to have something to follow for sure.

NASSTY

There are instructions on the autospring site but they don't show pictures like the RL instructions. I was going to post a link to the 2014 instructions but my computer won't let me download them because I don't have the office program that cost $6.99 per month. But I do have the 2014 instructions right here from my kit. Here is a link to the AS site, maybe you can download the instructions? www.autospringcorp.com

Newfie FX4

Got the instructions, kinda odd they just decided to do a write up and not take pictures, figured with the amount they have likely installed they would take some pictures. Should be able to figure it out from this anyway, and may even be easier since I have access to a car lift and such. Thanks for the tip.