09 a/c blower fan stuck on high
#1
Member
Thread Starter
Join Date: Nov 2010
Location: Woodbridge,Ontario
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
09 a/c blower fan stuck on high
hi guys i just got into my truck today after work an i went to go turn my a/c on and the blower was already on high and i went to go put it down and it wont go down its says on the lcd that it does go down but the blower it self is stuck in high what can cause this and how to fix it????
#4
The fault is normally the resistor bank. Item #7. It is wired to give you only high speed upon failure as a safety default.
Try this, should be a fairly easy swap, check it first to see if there is any evidence of it being burnt out. Check that first before you let the dealer charge you for an hours labor.
http://www.tascaparts.com/partlocato...layCatalogid=0
Hope it works for you.
Try this, should be a fairly easy swap, check it first to see if there is any evidence of it being burnt out. Check that first before you let the dealer charge you for an hours labor.
http://www.tascaparts.com/partlocato...layCatalogid=0
Hope it works for you.
#7
Member
Thread Starter
Join Date: Nov 2010
Location: Woodbridge,Ontario
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Right under the glove box you will see a circle black box under it its right on the side and there is 2 10mm bolts on it holding it in place way easier to unplug the resistor first.
Trending Topics
#10
Senior Member