Let's talk about exhaust systems
#1
F150 Site Sponsor
Thread Starter
Let's talk about exhaust systems
When it comes to an exhaust system, it’s really hard to determine whether its quality, power, or sound is of more importance, as only a perfect combination of these features will result in a product that is the most effective for your vehicle. A quality exhaust will help your vehicle perform to its fullest potential by letting exhaust gases flow freely, and increase horsepower and torque by 7-10%. We are the authorized dealer of the most reputable names in this industry. Manufactures like Borla, MagnaFlow, Flowmaster & MBRP offer quality exhaust systems that provide better flow, performance and sound. The average car enthusiast has become accustomed to associating the sound of a car with its exhaust. The most common aftermarket exhaust system is the cat-back system. This term is used to describe an exhaust system that attaches to a catalytic converter and runs to the rear of the vehicle. This style is best for those who prefer to work on their own vehicle. In most applications it includes mandrel bent piping, clamps, and a muffler. And we are here to show you several options we have for 2014 Ford F-150. To view all exhausts we have for your model, you can click here: Ford F-150 Custom Exhaust Systems
MBRP® S5232409 - XP Series™ Stainless Steel Cat-Back Exhaust System - Split Side Exit MODERATE SOUND, 2.5" Tubing, Split Side Exit, and Stainless Steel Angled Rolled Edge Tips.
MagnaFlow® 15460 - Street Series Stainless Steel Cat-Back Exhaust System MODERATE SOUND. Dual Split Rear Exit. 2.5" / 3" Tubing, 5" x 8" x 18" Muffler, 3.5" Polished Stainless Tip.
Borla® - S-Type™ Stainless Steel Cat-Back Exhaust System AGGRESSIVE PLUS SOUND, Split Rear Exit. 4" Inlet / 14" Outlet Single Round Rolled Angle-Cut Tip. 2.25" Tubing.
How do you think, will your car benefit from the exhaust system?
MBRP® S5232409 - XP Series™ Stainless Steel Cat-Back Exhaust System - Split Side Exit MODERATE SOUND, 2.5" Tubing, Split Side Exit, and Stainless Steel Angled Rolled Edge Tips.
MagnaFlow® 15460 - Street Series Stainless Steel Cat-Back Exhaust System MODERATE SOUND. Dual Split Rear Exit. 2.5" / 3" Tubing, 5" x 8" x 18" Muffler, 3.5" Polished Stainless Tip.
Borla® - S-Type™ Stainless Steel Cat-Back Exhaust System AGGRESSIVE PLUS SOUND, Split Rear Exit. 4" Inlet / 14" Outlet Single Round Rolled Angle-Cut Tip. 2.25" Tubing.
How do you think, will your car benefit from the exhaust system?
#2
Bought a gibson exhaust and not totally impressed with the sound not to mention it rattles when I hit a bump. Does borla offer a muffler that I could have a shop swap out with the gibson muffler to get a better sound?
#3
F150 Site Sponsor
Thread Starter
Yes sure, we do have a wide choice of performance mufflers made by Borla, Magnaflow and others in various sizes so you can swap your exhaust:
Check them on the following page: http://www.carid.com/2011-ford-f-150...ance-mufflers/
Check them on the following page: http://www.carid.com/2011-ford-f-150...ance-mufflers/
The following users liked this post:
mgrusz16 (10-08-2014)
#6
F150 Site Sponsor
Thread Starter
Incredible sale from MBRP!
It's time to participate in the Holiday Sale and save up to $110 for the qualifying products from MBRP. Prices are already reduced. This offer starts November 27 and expires December 1, 2015.
Follow this link to find all MBRP products: MBRP™ | Performance Exhaust Systems & Custom Tips – CARiD.com
It's time to participate in the Holiday Sale and save up to $110 for the qualifying products from MBRP. Prices are already reduced. This offer starts November 27 and expires December 1, 2015.
Follow this link to find all MBRP products: MBRP™ | Performance Exhaust Systems & Custom Tips – CARiD.com
#7
Large Member
The Borla S type sounds good, but buy the dual single side exit as linked above if you go that route. I suggest not to buy the dual rear exit unless you are ready to put in a lot of elbow grease. I got one last week and they cannot be lined up evenly and the drivers side is a pain to get seated without hitting and melting off your bumpers paint..
Trending Topics
#8
The Borla S type sounds good, but buy the dual single side exit as linked above if you go that route. I suggest not to buy the dual rear exit unless you are ready to put in a lot of elbow grease. I got one last week and they cannot be lined up evenly and the drivers side is a pain to get seated without hitting and melting off your bumpers paint..
Hello,
I'm sorry that you are not satisfied with your Borla Exhaust. We would be more than happy to talk with you about this and help you in any way we can. Please call our customer service manager, Chris, at 1-877-462-6752 Ext. 212.