Baja Kits F150 4" Lift Spindle - F150Forum.com Member Discount Inside
#42
Member
Bajakits... very awesome stuff! that is the right way to lift a truck (IMO) ... no drop sub-frame, no strut blocks. Just good old ground clearance and suspension travel.
I'm hoping to get setup as a vender for your Suspension kits. I think we need a little awesomeness here in NC.
Going to put your kit on my shop truck as soon as I can, so i will go from a lowered F-150 to a lifted one! should be sweet!
As for the rear squat on the trucks, that is easily remedied with a rear block setup.
I'm hoping to get setup as a vender for your Suspension kits. I think we need a little awesomeness here in NC.
Going to put your kit on my shop truck as soon as I can, so i will go from a lowered F-150 to a lifted one! should be sweet!
As for the rear squat on the trucks, that is easily remedied with a rear block setup.
Last edited by Morghill; 06-05-2015 at 12:45 PM.
#43
Selling my 2wd f150 4" spindles
i am selling my baja kits 4" spindles because i want to go a different route. i bought the spindles so i could put 35s on and i did. But it is time for something new.
im asking $650
call or text 281-900-6456
im asking $650
call or text 281-900-6456
#45
#46
It's been sometime but I'm bumping this thread up!!!
I have a combo special specifically for the 15+ F150 2WD owners but I will also offer this to the 09-14 owners for a limited time!
Because the 2015 Upper arm is different from the 09-14, you will need to run our Upper Control arm with the Lift Spindle. If you don't the geometry will be completely off.
The Lift Spindle and UCA together comes out to $2049. I can do this combo for $1800!!!
Please PM, Email or call me with any questions or if you are ready to place an order.
Thanks
JT
I have a combo special specifically for the 15+ F150 2WD owners but I will also offer this to the 09-14 owners for a limited time!
Because the 2015 Upper arm is different from the 09-14, you will need to run our Upper Control arm with the Lift Spindle. If you don't the geometry will be completely off.
The Lift Spindle and UCA together comes out to $2049. I can do this combo for $1800!!!
Please PM, Email or call me with any questions or if you are ready to place an order.
Thanks
JT
#48
It's been sometime but I'm bumping this thread up!!! I have a combo special specifically for the 15+ F150 2WD owners but I will also offer this to the 09-14 owners for a limited time! Because the 2015 Upper arm is different from the 09-14, you will need to run our Upper Control arm with the Lift Spindle. If you don't the geometry will be completely off. The Lift Spindle and UCA together comes out to $2049. I can do this combo for $1800!!! Please PM, Email or call me with any questions or if you are ready to place an order. Thanks JT
#49