zimmer0

iTrader: (1)

[MENTION=134559]Rnlcomp[/MENTION] get a set of 4wd OEM coilovers to gain ~1.5"

RLXXI

I think I'm going to level the truck the way I did years ago and clamp the leaf springs, cheap easy and reversible with the zip of an impact.

Don't know at this point. I guess people in California and Carolina like that retarded looking squat, not me.

.

Baja Kits

He can always buy the King Coilover upgrade that we offer as they have a range of 0-3.5" of lift and they ride much nicer then the factory shocks.

https://www.bajakits.com/product/kin...ont-coilovers/

RLXXI

If I was going to spend as much I certainly wouldn't want to alter front suspension geometry, I'd put the 4" spindles with rear blocks on. Thanks anyway.

.

dcferg

Baja Kits

I have a 2006 F150 4x4. Do you guys make a 4" spindle lift that would work with my setup? Aftermarket coilovers and UCA's are in my near future

thanks for your time

Baja Kits

Im sorry we do not make a lift spindle for the 4wd due to the axels. We do offer our front Chase Kit for the 4wd:

http://www.bajakits.com/product/baja...it-front-only/

It includes Baja Kits Spec King Remote Coilovers and our Fully boxed upper control arms with 1" uniballs.

K-DUB

will this kit work with 18" wheels

drumf150

Yes it will but if you are trying to run 35s, offset comes into play

Baja Kits

18s will work fine. Its the backspacing that is important. The lift spindle requires 5" of back spacing or less.

smkennedy55