Pellegrini13

I have a 07 fx4. Currently running stock ford 20's that were on there when I bought the truck. I've installed a 2.5 level kit for the front. I have 275/60r20 tires on there now and I found a great deal on some 295/60r20 nittos. I'm worried the tire will be two wide. Will they fit the stock rims?

techrep

iTrader: (1)

Yes...

redcelica

Will fit no issue. You MIGHT get a slight bit of rub at full lock. My 285/65/20 BFGs rub a little.

Pellegrini13

I mean I figure they would. But when I compared side to side the 295's looked a lot wider. So it threw me off

berty

watch the UCA on full lock, but you should be good. With my 2012, exact level and tires on stock wheels, I could slide a sheet of paper and nothing more between my tire and UCA on full lock.

techrep

iTrader: (1)

I run 295/65/20 with minor rub and its the 65 height causeing the rub not the 295 width.. my last set of M/T's were 305 and still did not rub the UCA .. this is on stock off set wheels though..

berty

Stock +44 offset?

Pellegrini13

That's the thing, I'm not sure. It's supposed to have 18 off road wheels for stock. When I got it from the dealership, either them or the previous owner put the new 20" rims on it. I'm supposing they're the same offset. They're flush with the tire

techrep

iTrader: (1)

Yes