KevFord1993

Hi everyone, I don't quite get how this offset - backspacing thing quite works.

I am curious for I am buying these for my 1994 f250 with stock steels.

http://www.procompusa.com/prodDetail...73&plID=108977

EDIT: If you don't want to click the link, they're (16x8, 8x6.5) 6" off set 4.5" backspacing.

Does anyone know how much further they will stick out from the fender? I want that aggressive wider stance. Rubber will be 33's that are about 11.5" wide.

(ProComp all terrains to be exact)

--
I'm a ProComp nut

KevFord1993

Nothing?

Manuellabour247

The picture might not do it justice. Those rims look like they are factory offset. Not sure on the "backspacing". I know on the half tons some 33's hit the rail at full lock, but not all of them. You might be ok with that, but I don't think they are going to stick out too terribly far even being 33x11.5 tires.

KevFord1993

If I'm looking for a wider stance, what is the route I'd go in regards to having that? What do I look for in the wheel mainly?

KevFord1993

Last bump before I give up on this forum.

papa tiger

Try a search, there is a lot of thread material from guys who have done it. It is a holiday so many probably are traveling today.


https://www.f150forum.com/f4/tire-wh...04-08-a-24510/


These guys can help U.