three inch body lift???
07-26-2008, 01:16 PM
#1
justin
Thread Starter
Join Date: Jul 2008
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
three inch body lift???
i have a 98 f150 4x4 w. a three inch body lift
it has 305/70s(33x12.50s) on the stock rim and they clear with
inches to spare all the way around,except for the upper control
arm is about an inch away from the widest part of the tire.
and i have a set of 16x10 black dick cepek dc-1s
they actually measure up to about 11.5 inches wide
i wanna know if some 305/70s will look to skinny on this rim
or does anybody know if the dick cepeks are deep enough
to put 33x13.50s on and clear the upper control arm
it has 305/70s(33x12.50s) on the stock rim and they clear with
inches to spare all the way around,except for the upper control
arm is about an inch away from the widest part of the tire.
and i have a set of 16x10 black dick cepek dc-1s
they actually measure up to about 11.5 inches wide
i wanna know if some 305/70s will look to skinny on this rim
or does anybody know if the dick cepeks are deep enough
to put 33x13.50s on and clear the upper control arm
08-25-2008, 08:28 PM
#3
Junior Member
Join Date: Aug 2008
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I have 2001 f-150 which is the same running gear upper and lower controls and all. i had a 3 inch body lift, and i had 16x10s with 33 12 50s and they cleared just fine. with it being a little wider, you got to think its about an half an inch on each side so you should be completely fine.
09-17-2008, 07:48 AM
#4
Junior Member
Join Date: Sep 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
i have a 98 f150 4x4 w. a three inch body lift
it has 305/70s(33x12.50s) on the stock rim and they clear with
inches to spare all the way around,except for the upper control
arm is about an inch away from the widest part of the tire.
and i have a set of 16x10 black dick cepek dc-1s
they actually measure up to about 11.5 inches wide
i wanna know if some 305/70s will look to skinny on this rim
or does anybody know if the dick cepeks are deep enough
to put 33x13.50s on and clear the upper control arm
it has 305/70s(33x12.50s) on the stock rim and they clear with
inches to spare all the way around,except for the upper control
arm is about an inch away from the widest part of the tire.
and i have a set of 16x10 black dick cepek dc-1s
they actually measure up to about 11.5 inches wide
i wanna know if some 305/70s will look to skinny on this rim
or does anybody know if the dick cepeks are deep enough
to put 33x13.50s on and clear the upper control arm
12-29-2012, 04:01 PM
#7
Trending Topics
12-30-2012, 02:52 AM
#8
SkallyWag
