shelton14

So I put a 2.5" leveling kit on my 2013 and 35/12.5/20 trail grapplers and I'm getting a lot of rubbing in the rear portion of my front fenders... I've already cut the plastic front bumper but I'm hitting metal in the rear of the fender... Is cutting and properly painting over the metal on the inner fender well a normal solution or do people normally do something different... I am looking for a quick cheap fix for this issue.... Any suggestions and info will gratefully be appreciated.

Thanks

techrep

iTrader: (1)

that tire is 13.4 wide which is causing your issue.. you do not mention what wheels they are mounted on.. spacers may help..

shelton14

20" by 9" Fuel offroad d515 +1 offset

gprice2

Can you post pics? I'm about to order that exact wheel and tire size setup

shelton14

They r in my album bud

gprice2

Sorry out of town on the phone so it didn't come up

shelton14

So do you still want me to post some pics on this thread or were you able to access my album

gprice2

I'll access it later thank you though

techrep

iTrader: (1)

Backspacing ??

shelton14

Unknown... It sticks out about 1.5" outside my wheel well.... I knows it's a +1 offset