Rough Country Lifts
#1
Member
Thread Starter
Rough Country Lifts
Been reading through the forum for a while and decided to join just for this reason. If you believe these are made in China then you are badly mistaken and do not know the history of this company. They back all their products just like some of the others that cost way more and if your not satisfied with the lift they will even pay the installer to remove the lift. I work at a steel mill that has a QAD lab that can test anything you want to know about steel. Some of the other guys debated which lift was stronger so we tested the cross members on a few. Rough Country finished near the top or at the top on every test. Bottom line they are very good lifts.
#2
I installed 6 inch rough country lift myself, on my 2013 f150 screw. Great kit for the money, quality is there, everything lined up perfect. Instructions were good. I like the double u bolts on the rear springs that I didn't see on other kits. I got an alignment after the install and truck goes down the road perfect.
Trending Topics
#8
Member
Installed a 4" Rough Country lift on my truck and had a minor issue with one of the caliper mounting holes not lining up properly, easily fixed with a little dremel work. Other than that it is extremely robust in construction and am very pleased with the results.
#10
Senior Member
Been reading through the forum for a while and decided to join just for this reason. If you believe these are made in China then you are badly mistaken and do not know the history of this company. They back all their products just like some of the others that cost way more and if your not satisfied with the lift they will even pay the installer to remove the lift. I work at a steel mill that has a QAD lab that can test anything you want to know about steel. Some of the other guys debated which lift was stronger so we tested the cross members on a few. Rough Country finished near the top or at the top on every test. Bottom line they are very good lifts.
Was there a specific thread or post you are referring too?
JT