You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I just recently finished off my lift and my rear end squeeks when I apply enough brake to transfer weight forward, but not when lightly decellerating. I got under there and noticed the finger sized hose that goes onto a bung on the axle was torn off. I cut off the hose on the bung and reattached the rest of the hose but its still noisy. I got my rear end burried and it was below water level for some time a day or so before I noticed the sound. I think this how has to do with brake release pressure. If I got water in it and that is causing the noise how do I get it out, any other ideas on the source of sound?