please help lift spindles and coil spacers
#1
please help lift spindles and coil spacers
so i have fabtech 3.5" lift spindles in the front with 33's but im thinkin i want 35's next go around, and i want to get 2" coil spacers to bring it up to 5.5" and put 3" blocks in the rear. but my question is will this cause to much positive camber and if so can if adjust it to normal. and if theres any other problems with this? please help
#2
If you have a camber kit you shold be able to get the camber within oem spec. i get rough country 2'' lift spings though. the stockers are prolly getting tired by now. there only like $140
#3
so i have fabtech 3.5" lift spindles in the front with 33's but I'm thinking i want 35's next go around, and i want to get 2" coil spacers to bring it up to 5.5" and put 3" blocks in the rear. but my question is will this cause to much positive camber and if so can if adjust it to normal. and if theres any other problems with this? please help
I have that exact same setup with 33's. The coil spacers and your springs will sag. My truck started level but is now about 1/2-3/4" tail high. If I keep the truck it will be getting lift coils.
#4
#6
offroaddude-
here it is on pretty flat ground so you can get an idea of the amount the springs/spacers settled.