Nitto trail grappler 35..
#1
Nitto trail grappler 35..
So I'm putting some nitto TG 35x12.5r20 on y 2013 fx4 4x4 I will be putting a 2.5 level kit on and running my stock rims that came with the appearence package. Wondering if I will need wheel spacers or will the level be enough to get by for a couple of months until I get a suspension lift and better rims with an offset.
#3
#5
looking for the right tire size
I have an 05 f150 with a 2.5 leveling kit and also roush 20s that came on the truck. I wanna run nitto 35x12.5r20 but not sure if they will fit or if i should just go with 33s
Trending Topics
#8
#9
I have a Rough Country 2.5" level with 1" in the back. Just put 295/70/18 Nitto Trail Grapplers on my '09 f150 with OEM wheels. (Looks awesome!) Tires measure out to be 34.3" and BARELY fit without rubbing the support arm! I dont think I could get anything any bigger unless I had a wheel with negative backspacing. However my vehicle is also 2WD.
I recommend being very careful with wheel spacers. My brother recently installed some on his 2012 Mustang and while driving 2 weeks ago had the bolts on the spacer break under pressure of a slow turn and his front right wheel fell off while driving. This caused damage to his caliper, rotor, and body damage to his front bumber and right fender.
I recommend being very careful with wheel spacers. My brother recently installed some on his 2012 Mustang and while driving 2 weeks ago had the bolts on the spacer break under pressure of a slow turn and his front right wheel fell off while driving. This caused damage to his caliper, rotor, and body damage to his front bumber and right fender.