ev2268

Ok guys first time f150 owner here. I have a 2010 super crew 4x4 and I am looking to lift. I found some 20x12 I want to run 33 12.50s on. I would like to go with a four inch not sure if I can fit without rub. I'm sure there is a thread already on this but I can't find it after searching. If someone has a link that would be good enough for me. Also always being a chevy guy with the IFS my front wheels always stocked out a little further than the back. Which leads me to my other question what offsets should I be looking at on wheels.

Thanks guys

Skyline

im not a specialist on offsets, and i don't even know what i have on my truck, however i just have a front level kit and 33 inch tires fit with no problem

lcolbya

Man I think that is the exact setup I am running. Just not exactly sure on the wheel width.

ev2268

Change of plan going with 20x10 instead

f150skidoo

You should be able to do that setup with just a 2" level depending on what your rims offset and backspacing is you could run as large as a 35" with just a level.

ev2268

Ok guys this is what I figured up correct me if I'm wrong. My stock wheel is a 18x7.5 with +44 mm of offset which is roughly 1 3/4 inches from center line. The wheels I want are 20x10 with -24 offset which is roughly an inch from center line the opposite way "inside from center line. So with what I drew up putting those wheels on would make my outside wheel lip roughly 2 3/4 inches out further than stock. I want to run a 12.50 tire probably a 33 still not sure if a level/4"/6" will give me clearance but those are my figures any more help would be great.