Lets see those off-road pictures
#2321
Member
Been exploring the UP for some time and got some good pictures. I also screwed up pretty good. Hit a rock going way too fast and bashed in my LCA mount.
The following users liked this post:
sigma pi (09-26-2016)
#2324
Senior Member
#2325
Senior Member
#2326
Member
Most of the wheeling I have done is on posted full size orv trails that are on the Michigan DNR website. I hit the Freda grade route almost every weekend, but the lake linden route has been fun too. I go to school in Houghton so all these trails are 5-10 min away from campus
#2327
Member
Good news was it only was $100 to get it fixed at the local collision shop.
I know some of the raptor companies make weld on reinforcement plates for the lca mounts. I just need to give them a call to see if they will work with my truck
#2328
Senior Member
I was actually laughing about that myself. I bought that bumper specifically for the skidplate yet the one thing it leaves unprotected is what I hit a rock with.
Good news was it only was $100 to get it fixed at the local collision shop.
I know some of the raptor companies make weld on reinforcement plates for the lca mounts. I just need to give them a call to see if they will work with my truck
Good news was it only was $100 to get it fixed at the local collision shop.
I know some of the raptor companies make weld on reinforcement plates for the lca mounts. I just need to give them a call to see if they will work with my truck
I bought the RCI skids but the lca mounts are still exposed. Which, I understand because the skids would need to be several inches lower to accommodate and that wouldn't be good.