I have a lot of stock Raptor parts. Will they fit?
02-22-2016, 09:12 PM
#1
I have a lot of stock Raptor parts. Will they fit?
I have a bunch of raptor parts from my 2013 screw Raptor. Now I have a 16 screw 2.7 Ecoboost which I wanna build up. Does anyone know if my RAPTOR stock control arms, shocks, and frame support will for my 2016 Ecoboost?
02-29-2016, 10:50 AM
#2
Senior Member
the only way to know for sure is to take some measurements.
I 'think' the LCA difference was how the coilover mounted to the arm, not how the arm mounted to the frame - that would mean you should be able to swap to the Raptor arms and use the Raptor spec coilovers. You would need to measure both center to center on where the LCA mounts to the frame as well as total width between each set of 'ears' (the spot where each leg of the lower A arm actually bolts to the frame). I would do the same measurements for the UCAs to be certain.
As far as the frame support, it is a very good possibility that the frame shape is different - is this part of a bump stop kit?
I 'think' the LCA difference was how the coilover mounted to the arm, not how the arm mounted to the frame - that would mean you should be able to swap to the Raptor arms and use the Raptor spec coilovers. You would need to measure both center to center on where the LCA mounts to the frame as well as total width between each set of 'ears' (the spot where each leg of the lower A arm actually bolts to the frame). I would do the same measurements for the UCAs to be certain.
As far as the frame support, it is a very good possibility that the frame shape is different - is this part of a bump stop kit?