How to with links
#1
How to with links
I just got a 07 f150 2wd lariat I'm trying to go for that prerunner look with a bit of functionality. I am willing to spend 5k on my truck so any tips on where to shop and how to determine it done would be appreciated.
The following users liked this post:
sigma pi (06-04-2016)
#2
¯\_(ツ)_/¯
I'd say get a midtravel kit..
https://camburg.com/shop/suspension/...mance-7-0-kit/
$3,500 with coilover. Install it yourself.
Spend the rest on deaver springs, save for a simple bedcage + bypasses down the road.
https://camburg.com/shop/suspension/...mance-7-0-kit/
$3,500 with coilover. Install it yourself.
Spend the rest on deaver springs, save for a simple bedcage + bypasses down the road.
#5
Senior Member
#7
Senior Member
Cheapest route would be Raptor take-offs (1000-1500 for everything up front - UCAs, LCAs, brake lines, axle shafts, tie rods) - if you can find them - plus a deaver/alcon/national/wsi rear leaf pack, rear bump kit (2000), rear Raptor bypass shocks (500ish)
Plenty of guys have done the Raptor conversion on the 04-08's, just dig through the build threads.
A setup like the Camburg mentioned above is an affordable next step as is the Dirt King 2wd setup
Plenty of guys have done the Raptor conversion on the 04-08's, just dig through the build threads.
A setup like the Camburg mentioned above is an affordable next step as is the Dirt King 2wd setup
Trending Topics
#8
I really appreciate all the suggestion and sorry about how long it took me to reply. I like the idea of the mid travel kit.
I was wondering what you guys would suggest for coil packs, should I get aftermarket or OEM?
I was wondering what you guys would suggest for coil packs, should I get aftermarket or OEM?
#9
Dang, how did I miss this thread!!
Give me a call, email or PM me!
Our kit includes our boxed upper and lower arms, grade 9 hardware, extended brake lines and tie rod ends.
Our kit utilizes a King 3.0 coilover with an option to run a 3.0 bypass!!
Here are some pictures of my personal truck...
How soon are you looking at doing this? Do you have a budget in mind?
Thanks
JT
Give me a call, email or PM me!
Our kit includes our boxed upper and lower arms, grade 9 hardware, extended brake lines and tie rod ends.
Our kit utilizes a King 3.0 coilover with an option to run a 3.0 bypass!!
Here are some pictures of my personal truck...
How soon are you looking at doing this? Do you have a budget in mind?
Thanks
JT
The following users liked this post:
sigma pi (07-11-2016)