Eliminating Cats with no CEL
#1
Member
Thread Starter
Join Date: Aug 2010
Location: Tequesta, FL
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Eliminating Cats with no CEL
I am getting a new exhaust system for my 5.0. I want to remove the cats but since my 5.0 is EFI, it has catalytic moniters behind the cats. Can I remove the cats and not throw a code? Can I fool the computer to make it seem like the cats are still there?
#2
Senior Member
If your 5.0. is not a 96 you wont have O2 sensors behind your cats. My 95 bronco doesn't. I gutted my front cat and removed the rear one and never had a code because the O2 sensor is in the Y-pipe and thus doesn't know the difference.
#3
Senior Member
If it is a 96 or newer just go to your local auto parts store and ask for a spark plug non-fouler (normally in the help section at autozone). Screw your O2 sensor in to the non-fouler and screw that into your exhaust...
This will work with the rear O2 sensor seeing that it only monitors the exhaust gases and does not control your air/fuel ratio.
This will work with the rear O2 sensor seeing that it only monitors the exhaust gases and does not control your air/fuel ratio.
#4
I Bleed Speed
MIL eliminators. These are for a mustang, but will work for your truck. http://www.latemodelrestoration.com/...-O2-Simulators