regearing question
#1
Member
Thread Starter
regearing question
Hey guys,
Looking for some help here. I Have a 2000 F150 lariat with a 6 inch fabtech lift and I want to get 37 inch tires and an additional 3 inch body lift and I am wondering what gear ratio and what not I would need to upgrade to? 4.10, 4.56, 4.88? All help is appreciated Thanks!
Looking for some help here. I Have a 2000 F150 lariat with a 6 inch fabtech lift and I want to get 37 inch tires and an additional 3 inch body lift and I am wondering what gear ratio and what not I would need to upgrade to? 4.10, 4.56, 4.88? All help is appreciated Thanks!
#5
I run 37x12.5R17 with 4.88 gears. I have no issues in deep mud or long trips on the highway.
Just as a side note theirs no real right or wrong answer to this, it comes down to preference, but I think most will say that 4.56 or 4.88 will be good for that tire size.
Just as a side note theirs no real right or wrong answer to this, it comes down to preference, but I think most will say that 4.56 or 4.88 will be good for that tire size.
The following users liked this post:
xxGhOsTxx (03-11-2014)
#6
Member
Thread Starter
#7
Member
Thread Starter
Most people are saying 4.88 ill probably go with that. Juat to ask do you know how much that usually costs ballpark range?
Trending Topics
#9
I cant remember how much I paid for front and rear sorry.
The other thing you may want to look into is some kind of power chip that can correct your speedo. When I had my gears done I did a K&N cold air intake and a edge power chip at the same time.
I went out about a month ago, and found a Toyota TRD stuck in the mud. He asked if I thought I could make it through the same spot he got stuck. The TRD was probably on like 33's. With 4x4, my 37x12.5R17 BFG KM2's and 4.88 gears I powered right on through his spot with no issue.
The other thing you may want to look into is some kind of power chip that can correct your speedo. When I had my gears done I did a K&N cold air intake and a edge power chip at the same time.
I went out about a month ago, and found a Toyota TRD stuck in the mud. He asked if I thought I could make it through the same spot he got stuck. The TRD was probably on like 33's. With 4x4, my 37x12.5R17 BFG KM2's and 4.88 gears I powered right on through his spot with no issue.
Last edited by patclarke; 03-11-2014 at 09:30 AM.