6" Fabtech Lift dilema with the struts
#1
Junior Member
Thread Starter
6" Fabtech Lift dilema with the struts
Well my 2005 F150 came with a Fabtech 6" lift and my front struts have blown out. They are completely covered from the oil that was once within the strut. I don't know to much about lifts but from what I was told, the caps on the top of the struts has separated from where they are suppose to be. And I can see that the cap is about 2 inches above the strut. Has anyone seen this or had this happen? If so why did it happen and what can be done to prevent it from happening again? I went to my local lift kit shop asking about a replacement strut preferably in another brand. They told me they recommend staying with the same strut since its a fabtech strut thats made for the fabtech lift. When I told them why I wanted to get away from the fabtech strut their reply was they have never seen a strut have this happen in the 20 years he's been installing lifts. Is there another strut I should look at? What are your guys thoughts?
Last edited by solidheart; 06-18-2012 at 07:56 PM.
The following users liked this post:
solidheart (07-07-2012)
#4
Senior Member
I went to my local 4X4 shop and he said he can still get a fabtech strut to replace mine with.
The following users liked this post:
solidheart (07-07-2012)