35/12.50/20 Nitto Mud Grappler on factory wheels
07-08-2014, 09:45 AM
#1
ptsmgr
Thread Starter
Join Date: Jul 2014
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
35/12.50/20 Nitto Mud Grappler on factory wheels
Im thinking about upgrading my 2008 f150 with a 2.5 rough country leveling kit with some 35/12.50/20 nitto mud grappler. Will I need to put wheel spacers on it to keep from rubbing the upper control arm? Any advice or help would be great
07-08-2014, 10:50 AM
#2
Mark
iTrader: (1)
Depends on what wheels are you planing on running... offset and backspaceing ? Remenber 12.50 wide is really 13.39 wide. You could run a 295/60/20 no problem. I have 295/65/20 which = 35/12/20 and have minor rubbing in reverse @ full lock... my wheels are very close to stock +44 with 6.38 backspaceing.
07-09-2014, 01:28 AM
#5
Senior Member
Mud grapplers have a wide sidewall. I have 33s on 20" KMC slides and they're wide. Wheels have a little offset. You may need 1/4" wheel spacers but I've seen them on trucks before you may be able to tuck them. Great tire overall.
