2012 4wd switch on my 2011 FX4?
#1
2012 4wd switch on my 2011 FX4?
I just purchased a 2011 Fx4 Ecoboost F1fiddy and my father has a 2012 Ecoboost Fx4. My question is his 2012 can select the rear locker in 2wd. mine can only be selected in 4wd. I would assume the switch would mount the same and the connectors is identical? if anybody has done this I would appreciate any input.
#2
Senior Member
From this thread... https://www.f150forum.com/newreply.p...reply&p=775726
I'm working on doing this as well. I ordered the parts and they should be here Friday. The Raptor switch and transfer case control module should do the trick after looking at the wiring diagrams. This will be a comlete bolt in, no programming needed for the module. I'm a tech at a Ford dealer and buying the parts at cost plus 10% is only about $140. I'll let you all know how it works.
#4
Senior Member
nope the computer wont recognize just the switch i.e. it wont engage the locker in 2wd. So you'd need the module. Silly I know, you would think it'd just be a power wire ran straight to a relay to power the locker and a light on the dash but thats not the case. You could also just hot wire the locker up to a switch on the dash and get locker use in 2wd that way. Plus you wouldn't have any of the other limitations of the stock switch. You would I believe lose the light on the dash though.