Rims, tires, leveling kit help.....
#1
Junior Member
Thread Starter
Rims, tires, leveling kit help.....
Need some advice and ideas
I have a 2014 f150 looking to install some more off road looking tires and rims, and level it out and also add some hieght.
I need some recommendations.
I don't want tires that make a lot of highway noise
Don't want to go high where I have problems parking in public garages, under 7'
I'm thinking a 3" lift?
I also tow a 7,000 lbs travel trailer, almost a 1,000 lb tounge weight
I have stock 20's
145" wheel base
3.5l ecoboost
20.8.5j. Stock
P275/55R20
I have a 2014 f150 looking to install some more off road looking tires and rims, and level it out and also add some hieght.
I need some recommendations.
I don't want tires that make a lot of highway noise
Don't want to go high where I have problems parking in public garages, under 7'
I'm thinking a 3" lift?
I also tow a 7,000 lbs travel trailer, almost a 1,000 lb tounge weight
I have stock 20's
145" wheel base
3.5l ecoboost
20.8.5j. Stock
P275/55R20
Last edited by 6NCHANGE; 08-31-2015 at 09:50 PM.
The following users liked this post:
GJR90 (03-21-2016)
#4
#5
I have the same tires(275-60-20) as DPLUM15 actually installed last Friday. To me they look awesome and aggressive but with that there is more road noise. So far I notice it's louder around 35-45 mph then gets quieter the faster you go.Ive been on a highway a little bit and they ride nice and the noise wasn't a deal breaker unless you want total quietness. I'm still getting use to them but just by putting on new wheels and tires and a level my truck looks totally different now. Also they are heavier so I'm noticing a small hit on mpg so far maybe 1-2 mph that's a guess. I haven't been able to get a good reading yet haven't drove on highway long enough.
Last edited by Sugadog; 09-01-2015 at 01:59 AM.
#7
I honestly just told the place that i had it all done that i wanted a 2" front level,but i think it may be a 2.5" cause when i look up Rough Country leveling kit for a 2012 Ford F 150 fx4,it always brings up a 2.5". it was $99.95 on my invoice plus labor..i think this may be the one but dont hold me to it. http://www.roughcountry.com/ford-lev...t-kit-568.html i think you would need the part#569 kit??..
Last edited by Sugadog; 09-01-2015 at 12:52 PM.
The following users liked this post:
6NCHANGE (09-01-2015)
Trending Topics
The following users liked this post:
6NCHANGE (09-03-2015)