Deciding between 2 tire sizes?
10-21-2014, 07:34 AM
#1
Junior Member
Thread Starter
Join Date: Jul 2013
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Deciding between 2 tire sizes?
Debating between Mickey Thompson ATZ3's, 275/65/20 or 35x12.5x20?
I have platinum 4x4, looking to install 2.5 AS LEVEL with 3'' rear block. Which tire will best fit this setup without having rubbing issues or having to do any trimming or mods?
I have platinum 4x4, looking to install 2.5 AS LEVEL with 3'' rear block. Which tire will best fit this setup without having rubbing issues or having to do any trimming or mods?
10-22-2014, 01:02 PM
#2
I Like Tires
If you have stock wheels the 275/65R20 will give you the best chance to fit without rubbing.
The 35x12.50R20 will fit your rim, but what I have found is the 8.5" wide rim with +44mm offset sits to close to the control arm and this wide of a tire mounted on that rim will rub the control arm.
The 35x12.50R20 will fit your rim, but what I have found is the 8.5" wide rim with +44mm offset sits to close to the control arm and this wide of a tire mounted on that rim will rub the control arm.
10-22-2014, 01:08 PM
#3
Mark
iTrader: (1)
no other choice's ?? like a 285 or 295...like Bass said the 12.50's are more like 13.4 wide and may rub your UCA
