bpgiven

Trying to install some kicker door speakers on my 2010 F150. I just pulled out the old speaker and found that the connection is different than my kickers. Kickers just have two wires for crimping while door has a plug. Do I need to just remove the plug and crimp the two sets of wires together? And if so does order matter?

Fritzz

You can cut them and add the spade connection crimp ends if you want. Or you can get These.

Wyo11Scab

iTrader: (1)

Yes order does matter. It is called phase.
I would get the adapters. I have used them and they are nice. Especially if u swap out speakers

bpgiven

If the order wind's up going wrong, will they just not work?

Wyo11Scab

iTrader: (1)

They will be out of phase. Bass will suffer.

Fritzz

Went back and looked at my install notes on my 2010 XLT SCrew and this is what I had for the speaker wiring:

Left Front
+ White
- White/Brown

Right Front
+ White/Purple
- White/Orange

Left Rear
+ White/Green
- Brown/Yellow

Right Rear
+ Brown/White
- Brown/Blue