Want to replace factory audiophile sub with dual 12" subs!! Need help please!!
#1
Senior Member
Thread Starter
Want to replace factory audiophile sub with dual 12" subs!! Need help please!!
I have a 2007 F150 with the factory Audiophile system w/ nav and I want to take out the sub under the rear seat and replace it with two kicker 12". I have the subs, box, amp, and wiring kit already but the back of the audiophile HU doesn't have RCA for the amp hookup. Is there a way that I can make the stock HU work with my new setup?
This is what the HU looks like.
These are the components I bought:
Wiring Kit:
Amp:
Subs:
Box:
http://www.ebay.com/itm/360343686582...#ht_932wt_1163
Any help is much appreciated.
Thanks
-Derrick
This is what the HU looks like.
These are the components I bought:
Wiring Kit:
Amp:
Subs:
Box:
http://www.ebay.com/itm/360343686582...#ht_932wt_1163
Any help is much appreciated.
Thanks
-Derrick
Last edited by D.WRECK; 07-18-2012 at 09:31 PM.
#3
Junior Member
I am sure PAC makes a hookup, the AOEM FDR24 is a plug and play that provided front and rear RCA output for an amplifier, factory harness into PAC, PAC into factory HU I know it work on 2008 - 2012 but I am sure they make one for 2007. There are a lot of posts on the PAC.
#4
Senior Member
#5
Senior Member
It's the 8-Pin, you can get Metra's reverse wiring kit that will give you the connector, then just solder on an RCA jack to the two wires. I think I put the wire positions in the Basics sticky, if I didn't I can post them here.
#6
Senior Member
Thread Starter
Thanks
-Derrick