Video multi camera question
#1
Senior Member
Thread Starter
Video multi camera question
Not sure if this is the right place but..
I want to run multiple cameras to one dedicated monitor. Do I have to have a video processor?
My thoughts were to run the power for the cameras to individual turn signals and then Y the video cables to the single video feed. So the cameras would only have power when the different side turn signal was on.
For a front camera I would have a switched power.
Disclaimer: I would love to have it run through my factory small screen, but the module needed is too costly.
I want to run multiple cameras to one dedicated monitor. Do I have to have a video processor?
My thoughts were to run the power for the cameras to individual turn signals and then Y the video cables to the single video feed. So the cameras would only have power when the different side turn signal was on.
For a front camera I would have a switched power.
Disclaimer: I would love to have it run through my factory small screen, but the module needed is too costly.
#2
Senior Member
iTrader: (1)
Not sure if this is the right place but..
I want to run multiple cameras to one dedicated monitor. Do I have to have a video processor?
My thoughts were to run the power for the cameras to individual turn signals and then Y the video cables to the single video feed. So the cameras would only have power when the different side turn signal was on.
For a front camera I would have a switched power.
Disclaimer: I would love to have it run through my factory small screen, but the module needed is too costly.
I want to run multiple cameras to one dedicated monitor. Do I have to have a video processor?
My thoughts were to run the power for the cameras to individual turn signals and then Y the video cables to the single video feed. So the cameras would only have power when the different side turn signal was on.
For a front camera I would have a switched power.
Disclaimer: I would love to have it run through my factory small screen, but the module needed is too costly.
The following users liked this post:
16XLT (06-22-2016)
#3
Senior Member
Thread Starter
Thanks. Have you seen this set up function?
The following users liked this post:
16XLT (06-24-2016)