The ultimate thread for the pac aoem-frd24/ post all info here for all to enjoy
#42
Dazed and Confused
Remote dial but it is optional. Connect to adjust remotely or don't connect to adjust on the amp and forget it. If you have questions, decide on the amp then go to the website. You can usually find the manual online. All of the adjusting is done on the amp. The PAC is only used to take output from the radio and convert it to RCA for input to the amp.
Last edited by Tallyman89; 03-13-2012 at 07:56 AM.
#43
Junior Member
Join Date: Mar 2012
Location: South Louisiana
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I just installed a PAC audio AOEM-FRD24 in my 2011 f150 fx4 with the 6 disc non sub radio. I installed all new speakers and ran all new speaker wires. I have a 4 channel speaker amp and a sub amp with subs. I'm only getting 1 out of the 4 RCA channels working from the PAC. I can take that 1 and plug it into all four channels and each door speaker will play with that 1 RCA plug that works. Not sure what's going on. Don't know what else to check. Any ideas? Thanks
#44
HELP!
Installed PAC and am getting no signal from either set of RCAs, Amp Powers on, all connections double checked, both sets of RCA cables checked it seems like I am getting no audio output from PAC
Installed PAC and am getting no signal from either set of RCAs, Amp Powers on, all connections double checked, both sets of RCA cables checked it seems like I am getting no audio output from PAC
#46
Junior Member
Join Date: Mar 2012
Location: South Louisiana
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
#48
I had a similar issue. Check the wiring diagram and make sure all of the wires are in the correct locations. I had to move several of the wires around that were going into the PAC module.
#49
PAC site shows this only supporting 2004 - 2010. What are you guys having to alter for 2011's and 2012's? I have a 2012 with the standard head unit and Sync... it would be awesome if I could use this device and not affect any factory devices. Thanks!
EDIT: After reading this thread more in depth, I see several people have installed this on their 2012 models. I'm still a bit concerned considering PAC doesn't list the newer models. Does anyone have pictures of their install?
EDIT: After reading this thread more in depth, I see several people have installed this on their 2012 models. I'm still a bit concerned considering PAC doesn't list the newer models. Does anyone have pictures of their install?
Last edited by Mr. Keith; 04-05-2012 at 02:23 PM.
#50
Dazed and Confused
PAC site shows this only supporting 2004 - 2010. What are you guys having to alter for 2011's and 2012's? I have a 2012 with the standard head unit and Sync... it would be awesome if I could use this device and not affect any factory devices. Thanks!
EDIT: After reading this thread more in depth, I see several people have installed this on their 2012 models. I'm still a bit concerned considering PAC doesn't list the newer models. Does anyone have pictures of their install?
EDIT: After reading this thread more in depth, I see several people have installed this on their 2012 models. I'm still a bit concerned considering PAC doesn't list the newer models. Does anyone have pictures of their install?