Chilichad

Sounds like less work going to harness. Thanks again..

Anthony86

Hey all
so i bought the PAC AOEM-FRD24...for my 2014 XLT with 4.2" screen

i wish i read this thread beforehand.

so im selling mine..un used


but im curious has anyone found a device that can gix aux preamp outputs wit the stock HU on the 2013+ with 4.2" sync screen?

Wyo11Scab

iTrader: (1)

No. You will need to tap into the speaker wires. What do you want to do with them?

chamberlin_d

Time for some thread revival...
I am going to remove my advent system, and go back to stock. I have this harness on order, hoping to plug it in, and use the rear rca's to my mono amp. Is there anything I am missing or will this just work? I am pretty sure the amp turn-on wire is ran elsewhere, so I wouldnt need to worry about it.

Wyo11Scab

iTrader: (1)

year?
But given that you had an Advent before, it should work.

chamberlin_d

Sorry, its a 14, without the 4.3 inch screen, regular stacked radio.

Wyo11Scab

iTrader: (1)

What are u going to use the amp for a sub??

chamberlin_d

Yes, just a single ten under the seat.

Wyo11Scab

iTrader: (1)

All you need to do is tap into one of the rear speaker wires for a signal. You can access them under the door sills. One on each side. Add a cheap hi to low level converter for the amp input.

chamberlin_d

Thanks, but I already have the rca's running to the hu. So by adding this, it technically should work.