System Upgrade 2012 Platinum
#1
Junior Member
Thread Starter
Join Date: Jun 2009
Location: TX
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
System Upgrade 2012 Platinum
Newbie here.
I have the Sony system with nav And factory sub. I was going to connect the sub wires to an lc2 and then connect the lc2 to an amp. I was looking at this system.
Would tHat work?
Jaso
I have the Sony system with nav And factory sub. I was going to connect the sub wires to an lc2 and then connect the lc2 to an amp. I was looking at this system.
Would tHat work?
Jaso
#3
Junior Member
Thread Starter
Join Date: Jun 2009
Location: TX
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Sorry about that...I was submitting a message from my phone and the link didn't stick.
My goal is to have something that hits harder than the poly-filled factory 8 inch sub. I don't want to change anything with the Sony HU.
From reading through many posts it seems the best way to do this is to tap into the Sony amp using the wires from the factory sub and running them to the LC2. From there I could connect to another amp and then two 10 inch subs.
Is that about right? I may just end up getting the Kicker sub through Beau...looks like that might be easier.
Jason
My goal is to have something that hits harder than the poly-filled factory 8 inch sub. I don't want to change anything with the Sony HU.
From reading through many posts it seems the best way to do this is to tap into the Sony amp using the wires from the factory sub and running them to the LC2. From there I could connect to another amp and then two 10 inch subs.
Is that about right? I may just end up getting the Kicker sub through Beau...looks like that might be easier.
Jason
#4
Senior Member
iTrader: (1)
Sorry about that...I was submitting a message from my phone and the link didn't stick.
My goal is to have something that hits harder than the poly-filled factory 8 inch sub. I don't want to change anything with the Sony HU.
From reading through many posts it seems the best way to do this is to tap into the Sony amp using the wires from the factory sub and running them to the LC2. From there I could connect to another amp and then two 10 inch subs.
Is that about right? I may just end up getting the Kicker sub through Beau...looks like that might be easier.
Jason
My goal is to have something that hits harder than the poly-filled factory 8 inch sub. I don't want to change anything with the Sony HU.
From reading through many posts it seems the best way to do this is to tap into the Sony amp using the wires from the factory sub and running them to the LC2. From there I could connect to another amp and then two 10 inch subs.
Is that about right? I may just end up getting the Kicker sub through Beau...looks like that might be easier.
Jason