wadeo47

I have 2 10'' subs being pushed by a 760w amp in my 02 f150 . everything is wired correctly. the amp works properly but for some reason my subs wont work.... any help would be greatly appreciated. new to all this stuff so barny style is what i need.

thanks

desperado213

r u sure u have a good ground?

GATORB8

Check your fuses, check your turn on for power, check the battery + for power at the amp with a multimeter, make sure you have a good ground, make sure you have signal, make sure you're not wired at too low a load and making the amp go into protection.

bajaman

Any update on this one? What was the problem?

wadeo47

sorry it took so long to respond but heres the update. checked everything you guys suggested. ground is good. power is good. signal is good. should i be leaning towardds blown amp?

GATORB8

Are you positive you checked everything I said? If so, you're amp is blown.

Does the amp have a power light? Is it on?
Are you sure you didn't have a connector fall off of one of the subs?

wadeo47

unfortunatly yes i checked everything... i double and triple checked all the wiring... its all good.... any reccomendations for new amp?