InkedN33

Hi, I have a 2011 Ford F150 supercab stx 2wd(without microsoft sync). Instead of doing a whole new system. I was going to do a sub, amp and a lineoutput converter just so I get some nice bass in my truck. For a stock radio, the sound is pretty nice, and I'd like to keep it as stock as possible. The problem is, when I went to wire everything in the back of my head unit today, I couldnt figure out where to put everything. Does anyone have instructions that I could go from? Or some insight from whoever has done this before?


http://www.crutchfield.com/p_161LC2I...tput+converter

The link is the lineout converter. I just need help or instructions from anyone who has done this before. THanks in advance.

Tallyman89

I went with PAC AOEM FRD-24. It is plug n play.

InkedN33

Thanks for the info. Do you have a link. Where I can take a look?

Tallyman89

http://www.pac-audio.com/productDeta...&CategoryID=28

Google it for places to buy it. I got mine from Amazon. Very easy to install.

InkedN33

Thanks bud, i'll def. check into this. I bought a lineout converter but like i said, when I went to wire it into my stock head unit, I was lost cause ford wraps each other their wires in duct tape individually. Instead of sitting there all day and peeling them apart, i'd see if there were easier means.

2010FX4F150GILROY

You could also do a hi-lo converter from speakers to your amp... Converts hi level speaker line to RCA for your amp... installation directions here... http://www.ehow.com/how_6792146_inst...converter.html
you can get one from amazon.com here is one I found...
Another option would be to find an amp that accepts hi inputs.....

5.0drivinFive-O

When you hook the converter up, do you have to connect it to both rear speakers or just one?