Small 4-chan amp installed
#22
Senior Member
Thread Starter
The Alpine amp harness is designed to use the factory radio's power, both main power and remote turn on. That's what the yellow and the red/orange lines are. There's no need to run a separate power line. The amp is not a 2500 watt unit. And that's exactly what I liked about it. No fuss installation. Just wire it in series.
Yes, I cut off the Alpine connectors from the Alpine amp's wiring harness and replaced them with Ford style connectors from the Parrot Bluetooth harness.
Yes, I cut off the Alpine connectors from the Alpine amp's wiring harness and replaced them with Ford style connectors from the Parrot Bluetooth harness.
#23
Senior Member
With the exception of your issue with the switched 12v wire were the rest of the connections you had to solder and shrink color to color from the ford harness to the alpine unit?
If not how'd you match them up?
Thanks.
If not how'd you match them up?
Thanks.
#28
Senior Member
Have a few questions:
I have not yet removed my HU, want to get the amp and harness wired up first.
I have installed amps in the past, but this one has me confused.
The amp wiring harness, the end with the fuse, to which end of the Ford adapter wiring harness does it go to? The big or smaller end?
Or is the orientation in the picture correct?
Thanx for your help
Rob.
I have not yet removed my HU, want to get the amp and harness wired up first.
I have installed amps in the past, but this one has me confused.
The amp wiring harness, the end with the fuse, to which end of the Ford adapter wiring harness does it go to? The big or smaller end?
Or is the orientation in the picture correct?
Thanx for your help
Rob.
#30
Have a few questions:
I have not yet removed my HU, want to get the amp and harness wired up first.
I have installed amps in the past, but this one has me confused.
The amp wiring harness, the end with the fuse, to which end of the Ford adapter wiring harness does it go to? The big or smaller end?
Or is the orientation in the picture correct?
Thanx for your help
Rob.
I have not yet removed my HU, want to get the amp and harness wired up first.
I have installed amps in the past, but this one has me confused.
The amp wiring harness, the end with the fuse, to which end of the Ford adapter wiring harness does it go to? The big or smaller end?
Or is the orientation in the picture correct?
Thanx for your help
Rob.
The following users liked this post:
Scapegoat81 (05-03-2017)