On the Right Track?
#1
F-150 Frequent Flyer
Thread Starter
On the Right Track?
I have continued my research and may be finally catching on.
How does this look:
Factory HU ~~~ Aftermarket Harness ~~~ Factory Harness ~~~ Factory Amp ~~~ Audiocontrol LCQ-1 ~~~ Aftermarket Amp.
Factory Rears remain powered by factory amp.
Aftermarket fronts, tweeters and subwoofer powered by aftermarket amp.
I believe that this will bring the sound stage forward, provide a summed signal and off-set the roll-off.
Am I on the right track here?
Any suggestions on an appropriate aftermarket harness? I have been told that the PAC AOEM-FRD24 is not compatible with the Sony amplified systems.
How does this look:
Factory HU ~~~ Aftermarket Harness ~~~ Factory Harness ~~~ Factory Amp ~~~ Audiocontrol LCQ-1 ~~~ Aftermarket Amp.
Factory Rears remain powered by factory amp.
Aftermarket fronts, tweeters and subwoofer powered by aftermarket amp.
I believe that this will bring the sound stage forward, provide a summed signal and off-set the roll-off.
Am I on the right track here?
Any suggestions on an appropriate aftermarket harness? I have been told that the PAC AOEM-FRD24 is not compatible with the Sony amplified systems.
Last edited by Silver Surfer 5.0; 09-04-2012 at 01:18 AM.
#2
Senior Member
iTrader: (1)
I have continued my research and may be finally catching on.
How does this look:
Factory HU ~~~ Aftermarket Harness ~~~ Factory Harness ~~~ Factory Amp ~~~ Audiocontrol LCQ-1 ~~~ Aftermarket Amp.
Factory Rears remain powered by factory amp.
Aftermarket fronts, tweeters and subwoofer powered by aftermarket amp.
I believe that this will bring the sound stage forward, provide a summed signal and off-set the roll-off.
Am I on the right track here?
Any suggestions on an appropriate aftermarket harness? I have been told that the PAC AOEM-FRD24 is not compatible with the Sony amplified systems.
How does this look:
Factory HU ~~~ Aftermarket Harness ~~~ Factory Harness ~~~ Factory Amp ~~~ Audiocontrol LCQ-1 ~~~ Aftermarket Amp.
Factory Rears remain powered by factory amp.
Aftermarket fronts, tweeters and subwoofer powered by aftermarket amp.
I believe that this will bring the sound stage forward, provide a summed signal and off-set the roll-off.
Am I on the right track here?
Any suggestions on an appropriate aftermarket harness? I have been told that the PAC AOEM-FRD24 is not compatible with the Sony amplified systems.